0 medlemmar och 1 gäst tittar på detta ämne.
The AKG C-451 Condenser Microphone Modular System, or CMS as it was originally called, was a wonderful series of condenser microphone capsules, preamps, and accessories made by AKG between the late 1960's and the mid 1980's. The C-451E was AKG's first solid state condenser microphone using transistors (including a field effect transistor or FET) instead of a vacuum tube in the preamplifier circuit. Click here to see info from a 1969 AKG C-451E catalog. As time went on the C-451 system grew to include a very wide range of interchangeable modular components. Accessories included screw on pads, swivels, and extension tubes. It is too bad that the C-451 was discontinued by AKG. It is one of the all-time classic studio mics and still sought after by those that know these great mics.Capsules for the AKG C-451 Condenser Microphone SystemCK-1: Cardioid (standard capsule for the C-451 system)CK-1S: Cardioid with "shaped" or rising high frequency response (+6 dB @ 10 kHz)CK-2: Omni-directional (original version)CK-3: HypercardioidCK-4: Bi-directional (figure-eight) <Fairly rare>CK-5: Cardioid with shock mount and windscreen (for hand held vocal use, etc.)CK-6: Variable Pattern (omni-directional/cardioid/figure-eight) <Very rare, early capsule>CK-8: Short ShotgunCK-9: Long ShotgunCK-22: Omni-directional (newer version)I can't find any information to confirm if there ever was a CK-7 capsule or CK-10, etc., but it wouldn't surprise me if they were marketed at some point also. Capsules from the earlier vacuum tube equipped AKG C-60 (which uses an AC701K tube) and C-61 (which uses an RCA 7586 Nuvistor) small capsule condenser microphones, such as the CK-26 omni-directional and the CK-28 cardioid capsules, will also work with the C-451E system and vice versa.(Note that the CK-12 is any of the various versions of the large 1-inch condenser capsule used in the AKG C-12, C-12a, C-12b, C-24, C-412, C-414 variants, The Tube, and the C-12VR, etc. and is NOT part of the C-451 system.)BTW the CK nomenclature: the "C" stands for condenser and the "K" stands for capsule (in German capsule is spelled with a K).Preamps for the AKG C-451 Condenser Microphone SystemC-451E: Original preamp. For operation on 12 to 52 volts phantom power.C-451EB: C-451E preamp with the addition of a 3-position bass roll off switch.C-452EB: Same as C-451EB, but for 48 volts phantom power only.(Note: AKG mics with an E suffix indicates the mic is equipped with a 3-pin XLR connector. Generally for North American market.)
Original (detachable capsule model) 451E is standard preamp, 451EB has rolloff filter (B stands for Bass attenuator). With the original design, if you wanted to attenuate the signal, there were -10db and -20db pads which could be screwed in between the capsule and the mic body.On the AKG website, there is an explanation that "E" is the suffix for XLR connector, and alternative "C" and "CB" suffixes are for DIN connector. It describes the 452 as having exactly the same functions and performance characteristics as the 451 models, but intended for use only with existing 48 volt (nominal) installations.As EngineEars said, the 452 needs 48v phantom, whereas the 451 range operates 9-52vAlso, as far as I know the 452 only came with rolloff filter (i.e. 452EB)
Sonically identical to the classic C 451 with improved designSonically identical to the original, which featured the much-acclaimed CK-1 cardioid capsule, the new C 451 B is incredibly precise and accurate. AKG made the C 451 B with dramatically improved specifications. Using an extremely light diaphragm, the new C 451 B is almost totally insensitive to handling noise. Other features include an all-metal body for excellent protection from RF interference and high reliability for excellent results under almost all conditions.Increased stability selectable pad and high-pass filterThe C 451 B capsule is permanently fixed to the preamp to increase overall stability under mechanical stress. It includes a switchable preattenuation pad to increase the C 451 B's SPL capability. A switchable high-pass filter at 75Hz or 150Hz prevents low-end distortion. The AKG C 451 B microphone makes a great addition to any professional studio or recording setup.
The AKG C 569EB acheives a high degree of directivity and an exceptionally wide frquency response. This combination of features makes the C 568 EB ideal for high quality distant micing applications in theater, sound reinforcement, recording, film, and video.Due to its compact and lightweight design, the C 568 EB is ideal for camera mount applications. The C 568 EB is an electret condenser design which operates on both pressure gradient and interference principles. Below 500 Hz it functions as a hypercardioid microphone; above 500 Hz the acoustic interference tube introduces increasing directivity. A switch selectable 12 dB/octave 150 Hz roll-off filter effectively suppresses rumble and wind noise. Robust, all-metal housing contains the built-in preamp/ impedance converter. Phantom powering (9-52 V) required; foam windscreen and stand adapter included.Features: * Polar patterns: hypercardioid/directional * Frequency range: 20&SHY;20,000 Hz * Sensitivity: 11 mV/Pa (-39 dBV) * Max. SPL for 0.5 % THD: 128 dB * Equivalent noise level: 18 dB-A * Signal/noise ratio (A weighted): 76 dB * Bass cut filter: 12 dB/octave at 120 Hz * Electrical impedance: 600 ohm * Recommended load impedance: >2,000 ohm * Power requirement: 9 to 52 V phantom power * Current consumption: <2 mA * Connector: 3-pin male XLR * Finish: matte black * Size: dia.: 20 mm (0.8 in.); length: 255 mm (10 in.) * Standard accessories: SA 40, W 68